Leak Geeks Plumbing · (250) 927-4335

Water Heater Sizing Guide for BC Homes

Last updated · By Jay Johnston, Owner & Lead Plumber

Undersized water heaters mean cold showers. Oversized ones waste money. Here's how we actually size a tank or tankless heater for a BC household.

Sizing a storage tank (by people, not bedrooms)

Common rule of thumb for BC homes with mixed showers and baths:

  • 1–2 people: 40 gallon tank
  • 3–4 people: 50 gallon tank
  • 5+ people, or homes with a soaker tub: 60–80 gallon tank
  • Add ~10 gallons if you run laundry or dishwasher during shower windows

Sizing a tankless (by GPM, not gallons)

Tankless sizing is about peak flow rate (GPM) at the cold-inlet temperature in your area. In coastal BC, inlet temps drop to 6–8°C in winter — meaning a tankless has to do more work per gallon than the brochure assumes.

  • 1 shower + 1 sink: ~5 GPM at 70°F rise
  • 2 showers running together: ~7–8 GPM
  • 2 showers + dishwasher / laundry: ~9–11 GPM
  • Always size for winter inlet, not summer

Common BC mistakes

We replace a lot of recently-installed tankless units that were sized for spec-sheet inlet temperatures (15°C). At BC winter inlets, those units stall during the second shower. If you're getting tankless quotes, ask what inlet temperature was assumed in the GPM calculation.

Energy and cost tradeoffs

A larger tank costs more to buy and slightly more in standby loss. A correctly-sized tankless is more energy-efficient but more expensive up front. Our standard recommendation: right-size first, then choose tank vs tankless based on the comparison guide.

Common questions

Can I just match the size of my old tank?

Usually yes — but only if the old one actually met your needs. If you ran out of hot water with the old unit, size up. If half the tank was always unused, size down.

Does BC code require a specific size?

BC code doesn't dictate gallons — it requires safe install (T&P valve, expansion tank, drain pan, proper venting). Sizing is performance-based.

Related reading